-
Not
protected against direct or indirect
contact, designed to be incorporated in
unknown electrical equipment.
-
Not short
circuit and overload resistant.
-
IP00
protection grade against direct contact, in
accordance with IEC publication 529.
-
Designed for
fixed installation.
-
Reference
room temperature 25°C.
-
CEI 96-3 and VDE 0551 construction standards,
EN 61558-1 translation.
-
For large
quantities, upon customer’s request, we can
obtain certificates of conformity from
European and North American Quality
Institutes.
-
Test voltage
between primary and secondary winding 4KV.
-
Test voltage
between windings and ground 2.5KV.
-
Magnetic
core in silicon sheet steel with loss factor
of 1.5W/Kg.
-
Tropicalized
with air-dried or kiln-dried enamels (class
H).
-
Windings in
copper wire enamelled with class F (155°C)
or class H (180°C) resins.
-
The special
shape of the metal support enables many
positions of installation.
-
All the
components and materials that make up the
transformer are certified and comply with
relevant standards.
