REACTORS

     General specifications for standard series
     models*:

• Not protected against direct or indirect contact, designed to be incorporated in unknown electrical equipment.

• Not short circuit and overload resistant.

• IP00 protection grade against direct contact, in accordance with IEC publication 529.

• Designed for fixed installation.

• Reference room temperature 25°C.

• Test voltage between windings and ground 2.5KV.

• Magnetic core in silicon sheet steel with loss factor of 1.5W/Kg.

• Tropicalized with air-dried or kiln-dried enamels (class H).

• Windings in copper wire enamelled with class F (155°C) or class H (180°C) resins.

• The special shape of the metal support enables many positions of installation.

• All the components and materials that make up the reactor are certified and comply with relevant standards.

    * For non-standard series models, specifications may vary
           according to the specific requests of the client.