-
Not protected
against direct or indirect contact, designed to be
incorporated in unknown electrical equipment.
-
Not short circuit
and overload resistant.
-
IP00 protection
grade against direct contact, in accordance with IEC
publication 529.
-
Designed for fixed
installation.
-
Reference room
temperature 25°C.
-
CEI 96-3 and VDE
0551 construction standards, EN 61558-1 translation.
-
For large quantities,
upon customer’s request,
we can obtain certificates
of conformity from European and North American
Quality Institutes.
-
Test voltage between
primary and secondary winding 4KV.
-
Test voltage between
windings and ground 2.5KV.
-
Magnetic core in
silicon sheet steel with loss factor of 1.5W/Kg.
-
Tropicalized with
air-dried or kiln-dried enamels
(class H).
-
Windings in copper
wire enamelled with class F
(155°C) or class H
(180°C) resins.
-
The special shape of
the metal support enables many positions of
installation.
-
All the components
and materials that make up the transformer are
certified and comply with relevant standards.
